Ariens 932037 - 724 Benutzerhandbuch

GB - 28

1. Fuel tank is empty.
2. Fuel shut-off valve closed.
3. Build up of dirt and residue 

around governor/
carburetor.

4. Key Switch not in run 

position.

5. Electric starter not 

functioning.

1. Fill fuel tank.
2. Open fuel shut-off valve.
3. Clean area around governor/

carburetor.

4. Put Key Switch into run position.

5. Check for a bad starter or 

connections.

1. Out of fuel.
2. Fuel shut-off valve closed.

3. Mechanical jam in blower 

rake or impeller.

4. Polluted fuel supply.

5. Faulty spark plug.

1. Fill fuel tank.
2. Open fuel shut-off valve.

3. Turn off engine, remove key, and 

wait for all moving parts to stop. 
Check for and remove 
obstruction and repair before 
restart.

4. Replace with clean fuel.

5. Replace or clean spark plug.

1. See Engine Manual.

1. Friction disc not adjusted 

properly.

2. Traction belt not 

functioning.

1. Repair or replace friction disc. 

See Friction Disc Replacement.

2. Repair or replace traction drive 

belt. See Traction Drive Belt 
Replacement.

1. Friction disc wear.

1. Normal friction disc wear. 

Chunks or large pieces of rubber 
mean friction disc should be 
checked and replaced as 
necessary.

1. Shear bolts broken.

2. Auger is frozen in place.

3. Ice or debris is obstructing 

auger.

4. Attachment clutch/brake 

out of adjustment.

5. Attachment drive belt 

slipping.

1. Replace shear bolts (see Shear 

Bolts).

2. Move unit to a warm area to 

thaw.

3. With engine off, and auger 

disengaged, check for 
obstructions and remove.

4. Adjust attachment clutch/brake. 

See Attachment Clutch/Brake 
Adjustment.

5. Adjust or replace attachment 

drive belt. See Attachment Drive 
Belt Replacement.