MTD E2B5 & E295 Benutzerhandbuch

�����������������

��������������

��������������������

������������

��������������

�����

�����������

��������

�����������

������

���

����������������

��������������������

Activating choke control closes the choke plate on 
carburetor and aids in starting engine. Refer to the engine 
manual packed with unit for more detailed instructions.

Depressing primer forces fuel directly into engine’s 
carburetor to aid in cold-weather starting. Refer to engine 
manual packed with unit for more detailed instructions.

The ignition key must be inserted and snapped in place 
in order for the engine to start. Remove the ignition key to 
prevent unauthorized use of equipment. Do NOT attempt 
to turn the key.

The starter handle is used to manually start the engine.

Used to start engine with a 120V power source.

Requires use of a three-prong outdoor extension cord 
and a 120V power source.

Remove spark plug cover to access spark plug.

When engaged, the augers rotation draws snow into the 
auger housing and throws it out the discharge chute. 
Rubber paddles on the augers also aid in propelling the 
unit as they come in contact with the pavement.

Located on the upper handle, the auger control handle 
is used to engage and disengage drive to the auger. 

Squeeze the control handle against the upper handle to 
engage auger; release it to disengage.

Rotate the discharge chute to the left or right using 
chute handle. 

The angle of the discharge chute controls 

the distance that the snow is thrown. Tilt the discharge 
chute up for greater distance; tilt down for less distance. 
Loosen the hand knob on the side of the discharge 
chute to adjust. Tilt the chute to the desired position, 
and tighten the knob.

The shave plate maintains contact with pavement as 
the snow thrower is propelled, allowing snow close to 
pavement’s surface to be discharged.