Sears 486.248463 Benutzerhandbuch

7

•  Assemble the L.H. hanger bracket to the left side of 

the tractor frame using two 3/8" x 1" hex bolts, two 

 

3/8" lock washers and two 3/8" hex lock nuts as 
shown in fi gure 5.

•  Assemble the R.H. hanger bracket to the bottom hole 

where the mower stop bracket was removed and to 
the upper hole under the front of the foot rest. Fasten 
with two 3/8" x 1" hex bolts, 3/8" lock wash ers and 
3/8" hex lock nuts. (On tractors with muffl er guards, 
slide the hanger bracket between the guard and the 
tractor frame.) See fi gure 4.

•  Assemble a frame bracket to the L.H. foot rest and 

sway bar bracket as shown in fi gure 6. Use two 3/8" 
x 1-1/4" hex bolts, 

three spacers and two 3/8" lock 

wash ers.

•  Assemble a shoulder bolt to the inside of the L.H. 

frame bracket, securing it with a 3/8" lock wash er and 
a 3/8" hex lock nut. See fi gure 6.

•  Repeat with a frame bracket on the R.H. side of the 

tractor. Attach in the same manner but use 

spac ers (two per bolt).

• 

•  Remove the mower stop bracket and its two bolts and 

nuts from the R.H. side of the tractor frame as shown 
in fi gure 3.

•  If the tractor has a muffl er guard at the front of the 

R.H. foot rest, remove the bottom bolt and nut, and 
the washer which is located between the guard and 
the tractor frame. See fi gure 3.

•  Remove the two bolts from the bottom of both the 

R.H. and L.H. foot rests. See fi gure 3.