Troy-Bilt Flurry 1400 Benutzerhandbuch

This snow thrower is equipped with a circuit breaker to prevent 

overheating damage to the motor.
If the circuit breaker reset button pops out:
1. 

Release the motor control lever and do NOT restart the 

snow thrower for at least one minute, allowing the electric 

motor time to cool.

2. 

Press the circuit breaker reset button (located on the switch 

assembly) inward to reset. See Fig. 6-1.

Lubricate the pivot points on the motor control lever with a light 

oil once every season and before the snow thrower is put into 

storage at the end of the season.

If the snow thrower will not be used for 30 days or longer, follow 

the instructions below.
• 

Clean and lubricate snow thrower thoroughly as described 

in the lubrication instructions.

• 

We do not recommend the use of a pressure washer or 

garden hose to clean your unit.

• 

Make certain the power supply is disconnected.

• 

Store snow thrower in a dry, clean area. Do not store next 

to corrosive materials, such as fertilizer.

• 

Wipe extension cord to remove any foreign substance such 

as oil or stains. Replace extension cord if cut or damaged in 

any way.

• 

Wind cord in a series of equal loops on each side of your 

hand to prevent snarling.