Troy-Bilt 23AABA6X711 Benutzerhandbuch

Refer to the FLEX™ Power Base’s operator’s manual for engine 

starting and operating instructions.

1. 

With the kickstand UP on the FLEX™ Power Base, as shown 

in Figure 5-1, roll it over to the snow thrower attachment. 

2. 

Tip the FLEX™ Power Base forward, engaging the top 

mounting tab with the mounting handle on the snow 

thrower attachment, see Figure 5-2.

3. 

Once the top mount is engaged (1), and with both hands 

on the handle grips, tip the unit backwards somewhat 

swiftly to engage the bottom mounts (2). See Figure 5-3.

Note: The operator will be able to hear the lower mounts 

engage and lock when coupled properly. 

Fully stop the power unit engine before attempting to perform 

any maintenance steps or uncoupling of the attachment. Never  

attempt to uncouple the power base from the snow thrower 

attachment WITH the engine running.

Always turn off the FLEX™ Power Base 

engine and remove the key prior to attempting to 

replace the shear pins or uncoupling of the power 

base from the attachment.

1. 

Put the kickstand down.

2. 

Tip the FLEX™ Power Base forward to disengage the 

bottom mounts, then the top mount. 

3. 

Move the FLEX™ Power Base away from the snow thrower 

attachment.
Note: With the kickstand deployed in the downward 

(unlocking) position, the FLEX™ Power Base will rest 

comfortably in a parked position.