Bowens QuadX 3000 Benutzerhandbuch

Dear Customer,

Thank you for choosing Bowens.  The QuadX 3000 is an accurate,
ergonomic and powerful professional flash generator.   In order to
obtain the full benefit from your purchase, please spare a few
moments to familiarise yourself with this user manual.

Thank you.

•

 

Use in an environment where moisture or flammable vapour is likely to come in contact
with the unit.

•

 

Insert or remove flash heads without first switching off

•

 

Restrict air vents while in use.

•

 

Use a unit with damaged covers, mouldings, flash tube or modelling bulb.  If the unit is
dropped or damaged in any way always have it checked out before using.

•

 

Operate the unit without an safety Earthed mains supply.

•

 

Switch off and disconnect from the supply before changing modelling bulb or flash
tube.

•

 

Observe the mains supply requirements

•

 

Avoid placing cables where they can be tripped over. Protect from heavy, sharp or hot
objects, which may cause damage and replace damaged cables immediately.

Stored Energy (Max)

3000Ws Channel A only
or split 2000Ws (CHA) + 1000Ws (CHB)

Typical Recycle Time
(Full Power 230V 50Hz)

2 seconds  240VAC 50Hz
2.6 seconds 120VAC 60Hz

Supply Voltage AC

100-250V 50 or 60Hz

Stabilisation

+/- 0.1 f-stop

Modelling Lamps

4 x Max 650W

Ready Indication

Green ‘READY’ 

LED 

at 100%

Audible and Modelling light
Indication as selected.

Overload Protection

15A Thermal Breakers for Charge and Modelling

Nominal Sync. Voltage

6V

Photocell

On/Off

Sounder

On/Off

Modelling Power Control

Off / Proportional / Independent / 100%/ Automatic 100%
plus bias control

IR Remote Control

Full control, 12 channels
No. depends on transmitter

Guide Number:
Full power, 50

°

 Keylite, ISO 100

175  (UV coated tube)

Flash Duration (Full Power) t=0.5 1/1430s – Approximate value indicated
Flash Colour Temperature

Approx. 5600K (UV coated)

Flash Power Control

6.6 f-stop in 1/10 increments, scaled 10 = 3000 Ws

Recommended Flash Head :
QuadX 3000

BW-7660

Dimensions

L =360mm, W=180mm, H =370mm

Weight

11.6Kg

Due to our policy of constant product improvement Bowens International Limited reserve the right
to change equipment specifications without notice.

For details of all related products please contact your local distributor or visit
WWW.BOWENSINTERNATIONAL.COM