Shure 561 Merkblatt
2
SPECIFICATIONS
Type
Dynamic
Frequency Response
40 to 10,000 Hz (See Figure 2)
TYPICAL FREQUENCY RESPONSE
FIGURE 2
Polar Pattern
Omnidirectional
Impedance
Rated at 150 Ohms (200 Ohms actual). Designed for
connection to inputs rated at 19 to 300 Ohms.
connection to inputs rated at 19 to 300 Ohms.
Output Level (at 1,000 Hz)
Open Circuit Voltage . . . . . . –57.5 dBV/Pa (1.33 mV)
(1 Pa = 94 dB SPL)
Polarity
Positive pressure on diaphragm produces positive voltage on
the white cable lead relative to the blacklead.
the white cable lead relative to the blacklead.
Cable
1.2 m (4 ft.) two-conductor, shielded, unterminated
Stand Thread
Suitable for mounting on stand or gooseneck with 5/8”–27
thread.
thread.
Case
Silver and black aluminum with stainless steel grille
Dimensions
See Figure 3
OVERALL DIMENSIONS
FIGURE 3
Net Weight
142 grams (5 oz.)
Packaged Weight
255 grams (9 oz.)
Certification
Conforms to European Union directives, eligible to bear CE
marking; meets European Union EMC Immunity Requirements
(EN 50 082-1, 1992).
Conforms to European Union directives, eligible to bear CE
marking; meets European Union EMC Immunity Requirements
(EN 50 082-1, 1992).
FURNISHED ACCESSORIES
Allen wrench (No. 4) ......................................................... 80A67
OPTIONAL ACCESSORIES
Gooseneck, 45.7 cm (18 in.) ................................................G18
Gooseneck, 45.7 cm (18 in.), Side Vent ........................... G18A
Gooseneck, 30.5 cm (12 in.) ................................................G12
Gooseneck, 15.25 cm (6 in.), Side Vent ............................. G6A
Mounting Flange................................................................... A12
Heavy-Duty Mounting Flange .......................................... A13HD
Gooseneck, 45.7 cm (18 in.), Side Vent ........................... G18A
Gooseneck, 30.5 cm (12 in.) ................................................G12
Gooseneck, 15.25 cm (6 in.), Side Vent ............................. G6A
Mounting Flange................................................................... A12
Heavy-Duty Mounting Flange .......................................... A13HD
REPLACEMENT PARTS
Cartridge...............................................................................R50
Screen and Grille Assembly ............................................RK85G
Screen and Grille Assembly ............................................RK85G
For additional service or parts information, please contact the
Shure Service Department at 1-800-516-2525. Outside the United
States, please contact your authorized Shure Service Center.
Shure Service Department at 1-800-516-2525. Outside the United
States, please contact your authorized Shure Service Center.
ARCHITECTS' SPECIFICATION
The microphone shall be a moving coil (dynamic) type with a
frequency response of 40 to 10,000 Hz. It shall have an
omnidirectional polar characteristic and a low impedance rated at
150 Ohms for connection to inputs rated 19 to 300 Ohms. The
microphone output level shall be –57.5 dBV/Pa. It shall be
equipped with a non-detachable 1.2 m (4 ft.) cable. The
microphone shall be threaded for mounting on a stand or
gooseneck with a 5/8"–27 thread. The overall dimensions of the
microphone shall be 67.1 mm (2–21/32 in.) in length and 34.5 mm
(1–3/8 in.) in diameter. The microphone shall be the Shure Model
561 or equivalent.
frequency response of 40 to 10,000 Hz. It shall have an
omnidirectional polar characteristic and a low impedance rated at
150 Ohms for connection to inputs rated 19 to 300 Ohms. The
microphone output level shall be –57.5 dBV/Pa. It shall be
equipped with a non-detachable 1.2 m (4 ft.) cable. The
microphone shall be threaded for mounting on a stand or
gooseneck with a 5/8"–27 thread. The overall dimensions of the
microphone shall be 67.1 mm (2–21/32 in.) in length and 34.5 mm
(1–3/8 in.) in diameter. The microphone shall be the Shure Model
561 or equivalent.
20
20000
1000
10000
50
100
9
8
7
6
5
4
3
2
9
8
7
6
5
4
3
2
+10
0
–10
Hz
B
d
67.1 mm
(2–21/32 in.)
(2–21/32 in.)
34.5 mm DIA.
(1–3/8 in.)
(1–3/8 in.)
5/8 in.–27 thread
Nameplate
#4–40 Allen setscrews
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055