Sony UWP-C3 Benutzerhandbuch

Oscillator

Crystal-controlled PLL synthesiser

Type of emission

F3E

Carrier frequencies

798 MHz to 822 MHz (TV channels 62 to 64) or 838 MHz to 862 MHz (TV channels 67 to 69)
Users may choose from 189 frequencies on each model.

RF power output

30 mW or 5 mW (selectable)

30 mW or 5 mW (selectable)

50 mW

Antenna

1/4 

λ wave length wire

1/4 

λ wave length wire (internal)

Integral type

Pilot tone signal

32 kHz

Frequency response

50 Hz to 18 kHz (typical)

100 Hz to 18 kHz (typical)

50 Hz to 18 kHz (typical)

Reference deviation

±5 kHz (-60 dBV, 1kHz input)

±5 kHz (94 dB SPL, 1kHz input)

±10 kHz (-60 dBV, 1kHz input)

Signal-to-noise ratio

60 dB or more (±5 kHz deviation at 1 kHz modulation, A-weighted)

60 dB or more (±10 kHz deviation at 
1 kHz modulation, A-weighted)

Microphone capsule

—

Dynamic capsule (uni-directional)

—

Audio attenuator adjustment range

0 to 21 dB (in 3 dB steps)

Audio input level

-60 dBV (at 0 dB attenuator level)

—

MIC input position: -60 dBV (at 0 dB 
attenuator level), LINE input position: +4 dBu

Audio input connector

3.5 mm (5/32 inch) dia., 3-pole mini jack

—

XLR-3-11C type

Max. input sound pressure level

—

151 dB SPL (at 21 dB attenuator level)

—

Indicators

LCD

Operating channel number/frequency, attenuator level, RF-output level (High/Low), audio input status

Operating channel number/frequency, attenuator-

transmitter battery status and accumulated operating time

level, audio input status, RF-output status, 
transmitter battery status and accumulated 
operating time 

LED

Power status

Audio-input status

Power requirements

DC 3.0 V (with two AA-size alkaline (LR6) batteries)

Battery life

Approx. 6 hours with Sony AA-size alkaline (LR6) batteries at 25 °C (77 °F) at 30 mW output 

Approx. 6 hours with Sony AA-size alkaline 
(LR6) batteries at 25 °C (77 °F) at 50 mW output

Dimensions (W x H x D)

63 x 100 x 27 mm (2 1/2 x 4 x 1 1/8 inches)

φ52 x 240 mm (φ21/8 x 9 1/2 inches)

44 x 99 x 36 mm (1 3/4 x 4 x 1 7/16 inches)

Mass

Approx. 140 g (4.9 oz) including batteries

Approx. 300 g (10.6 oz) including batteries

Approx. 185 g (6.5 oz) including batteries

Supplied accessories

Omni-directional (UWP-C1)/Uni-directional 

Microphone holder (x1)

Soft case (x1)

(UWP-S1/X1)lavalier microphone (x1),windscreen (x1), 
microphone-holder clip (x1), belt clip (x1)

Oscillator

Crystal-controlled PLL synthesizer

Type of reception

Space diversity

Receiving frequencies

798 MHz to 822 MHz (TV channels 62 to 64) or 838 MHz to 862 MHz (TV channels 67 to 69) 
Users may choose from 189 frequencies on each model. 

Antenna

1/4 

λ wave length wire

Pilot-tone signal

32 kHz

RF squelch level

15 dBµ

25 dBµ

Frequency response

50 Hz to 18 kHz (typical)

Reference deviation

±5 kHz (at 1kHz modulation)

Signal-to-noise ratio

60 dB or more (±5 kHz deviation at 1 kHz modulation, A-weighted)

Audio output connector

3.5 mm (5/32 inch) dia., 

1/4-inch phone jack (unbalanced) 

–

3-pole mini jack (x1), unbalanced

or XLR-3-32 type (balanced)

Audio output level

-58 dBm

XLR-3-32: -28 dBm (LINE level) or -58 dBm (MIC level)

– 

1/4-inch phone jack: -30 dBm

Monitor output connector

3.5 mm (5/32 inch) dia., stereo mini jack (x1)

1/4-inch stereo mini jack (x1)

–

Monitor output level

5 mW (at 16 Ω)

–

Indicators 

LCD

Operating channel number/frequency, audio-output 

Operating channel number/frequency, audio-output status, RF-input level 

status, RF-input level, tuner battery status, and 
accumulated operating time

LED

RF-input status

Power requirements

DC 3.0 V (two AA-size alkaline (LR6) batteries)

DC 9.0 V

Battery life

Approx. 6 hours (with Sony AA-size alkaline (LR6) 

– 

batteries at 25 °C (77 °F) 

Dimensions (W x H x D)

63 x 100 x 30 mm 

212 x 44 x 209 mm 

56.6 x 25.5 x 121.0 mm 

(2 1/2 x 4 x 1 3/16 inches)

(8 3/8 x 1 3/4 x 8 1/4 inches)

(2 1/2 x 1 1/16 x 4 7/8 inches)

Mass

Approx. 180 g (6 oz) including batteries

Approx. 1.3 kg (2 lb 14 oz)

Approx. 150 g (5.3 oz)

Supplied accessories

Microphone stand adaptor (x1)*, shoe-mount

AC/DC adaptor (x1)

– 

adaptor (x1), belt clip (x1), output cable 
(x2, 3-pole mini-plug/XLR-type, 3-pole 
mini-plug/stereo mini-plug) 

*Microphone stand adaptor is not included in the UWP-C3 package.

S P E C I F I C A T I O N S