Mackie 8-submaster mixer Benutzerhandbuch
52
IV. Mix-B Mute mod
This modification converts the Mix-B Source
switch to a Mix-B MUTE switch. The switch will
no longer be able to source the channel signal.
This modification must be done on each channel.
For example, if you have a 24•8, the modification
must be done on all 24 input channels.
no longer be able to source the channel signal.
This modification must be done on each channel.
For example, if you have a 24•8, the modification
must be done on all 24 input channels.
See Figure 11. This modification takes place
on each channel strip in an area under Mix-B
Source switch.
Source switch.
1. Remove power cable.
2. Cut the conductor at Point G.
3. Add Jumper to point H.
4. Repeat for all input channels.
Figure 11: Modification IV — Mix-B Mute
BEFORE
cut here (G)
AFTER
add jumper (H)
ADD-ONS
SPECS
ETC.