Zoom G2 Benutzerhandbuch

 

In this manual, symbols are used to highlight warnings and 
cautions for you to read so that accidents can be prevented. The 
meanings of these symbols are as follows:

 

This symbol indicates explanations about extremely 
dangerous matters. If users ignore this symbol and 
handle the device the wrong way, serious injury or 
death could result.

This symbol indicates explanations about dangerous 
matters. If users ignore this symbol and handle the 
device the wrong way, bodily injury and damage to 
the equipment could result.

 

Please observe the following safety tips and precautions to 
ensure hazard-free use of the G2. 

 

Since power consumption of this unit is fairly high, we 
recommend the use of an AC adapter whenever 
possible. When powering the unit from batteries, use 
only alkaline types. 

 

• Be sure to use only an AC adapter which supplies 9 V DC, 

300 mA and is equipped with a "center minus" plug 
(Zoom AD-0006). The use of an adapter other than the 
specified type may damage the unit and pose a safety 
hazard. 

• Connect the AC adapter only to an AC outlet that supplies 

the rated voltage required by the adapter. 

• When disconnecting the AC adapter from the AC outlet, 

always grasp the adapter itself and do not pull at the cable. 

• During lightning or when not using the unit for an 

extended period, disconnect the AC adapter from the AC 
outlet.

 

• Use four conventional IEC R6 (size AA) batteries 

(alkaline). 

• The G2 cannot be used for recharging. 
• Pay close attention to the labelling of the battery to make 

sure you choose the correct type. 

• When not using the unit for an extended period, remove 

the batteries from the unit. 

• If battery leakage has occurred, wipe the battery 

compartment and the battery terminals carefully to 
remove all remnants of battery fluid. 

• While using the unit, the battery compartment cover 

should be closed. 

 

 

 

To prevent the risk of fire, electric shock or 
malfunction, avoid using your G2 in environments 
where it will be exposed to:

 

• Extreme temperatures 
• Heat sources such as radiators or stoves

• High humidity or moisture 
• Excessive dust or sand 
• Excessive vibration or shock

 

 

 

• Never place objects filled with liquids, such as vases, on 

the G2 since this can cause electric shock.

• Do not place naked flame sources, such as lighted candles, 

on the G2 since this can cause fire.

• The G2 is a precision instrument. Do not exert undue 

pressure on the keys and other controls. Also take care not 
to drop the unit, and do not subject it to shock or excessive 
pressure. 

• Take care that no foreign objects (coins or pins etc.) or 

liquids can enter the unit. 

 

You should always turn off the power to the G2 and all 
other equipment before connecting or disconnecting 
any cables. Also make sure to disconnect all connection 
cables and the power cord before moving the G2.  

 

Never open the case of the G2 or attempt to modify the 
product in any way since this can result in damage to 
the unit. 

 

 

Do not use the G2 at a loud volume for a long time 
since this can cause hearing impairment.   

 

For safety considerations, the G2 has been designed to provide 
maximum protection against the emission of electromagnetic 
radiation from inside the device, and protection from external 
interference. However, equipment that is very susceptible to 
interference or that emits powerful electromagnetic waves 
should not be placed near the G2, as the possibility of 
interference cannot be ruled out entirely.

With any type of digital control device, the G2 included, 
electromagnetic interference can cause malfunctioning and can 
corrupt or destroy data. Care should be taken to minimize the 
risk of damage.

 

Use a soft, dry cloth to clean the G2. If necessary, slightly 
moisten the cloth. Do not use abrasive cleanser, wax, or solvents 
(such as paint thinner or cleaning alcohol), since these may dull 
the finish or damage the surface.

 

COMP ..................................................................................... 23
WAH/EFX ................................................................................23
ZNR .........................................................................................24
DRIVE ......................................................................................25
EQ ...........................................................................................26
EXTRA EQ/CABI&MIC............................................................. 26
MOD/SFX ................................................................................26
DELAY .....................................................................................29
REVERB ..................................................................................29
CONTROL ............................................................................... 30

 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures: