Roland MC-909 Benutzerhandbuch
39
Recording a pattern
Pattern Mode
Realtime Erase
During realtime recording, you can use the velocity pads or the
realtime modify knobs to erase data.
realtime modify knobs to erase data.
1.
Select the part from which you want to erase data.
Select a part in the same way as described in “Selecting the part
to record” (p. 38).
to record” (p. 38).
2.
During recording, press [F2 (Erase)].
The realtime erase window will appear.
fig.1-**
3.
In the Erase Type field, choose the type of data that
you want to erase.
*
If you want to erase knob data, operate the corresponding knob of the
panel to specify that data.
panel to specify that data.
4.
Erase the data.
• When “NOTE” has been selected, hold down two notes on the
velocity pads or on an external MIDI keyboard, and all note
messages within the region defined by those two notes will be
erased while you continue holding down the notes.
messages within the region defined by those two notes will be
erased while you continue holding down the notes.
• For other types of data, the data selected by Erase Type will be
erased while you continue holding down [F5 (Erase)].
5.
To return to recording mode, press [F5 (Close)] or
[EXIT].
Recording Cancel
Here’s how you can cancel the entire content of a recording, and
return to the recording-standby state.
return to the recording-standby state.
1.
During recording, press [F5 (Rec Cancel)].
A message will ask for confirmation.
2.
To carry out Recording Cancel, press [F6 (Execute)].
All the data that has been recorded from the time you pressed
[PLAY] to start recording until you pressed [F5 (Rec Cancel)]
will be discarded.
[PLAY] to start recording until you pressed [F5 (Rec Cancel)]
will be discarded.
*
To cancel, press [F5 (Cancel)].
TR-REC
This is a recording method in which the velocity pads of the MC-909
are used as timing scale buttons to enter note messages.
are used as timing scale buttons to enter note messages.
You can input/delete notes by pressing the velocity pads to switch
them between lit/extinguished. This is an easy way to specify the
timing at which notes are to be placed.
them between lit/extinguished. This is an easy way to specify the
timing at which notes are to be placed.
*
This method cannot be used to record data other than note messages
(e.g., control changes produced by operating the realtime modify
knobs).
(e.g., control changes produced by operating the realtime modify
knobs).
Standby screen
fig.1-30
Function buttons
ALL
All data
NOTE
Note messages
P-AFT
Polyphonic aftertouch
C-AFT
Channel aftertouch
CC
Control change
PC
Program change
BEND
Bend data
SYSEX
System exclusive data
BPM
Tempo change data
MUTE
Mute on/off
EXCEPT NOTE
All data other than note messages
Parameter
Range
Explanation
Rec Beat
2/4–7/4, 5/8–
7/8, 9/8, 12/8,
9/16, 11/16,
13/16, 15/16,
17/16, 19/16
7/8, 9/8, 12/8,
9/16, 11/16,
13/16, 15/16,
17/16, 19/16
Pattern time signature
* Can be specified only for
* Can be specified only for
an empty pattern.
Rec Measure
Length
Length
1–998
Pattern length
* An already-recorded pat-
* An already-recorded pat-
tern can be made longer,
but not shorter. To shorten
it, use the pattern edit De-
lete Measure (p. 45) to de-
lete one or more measures.
but not shorter. To shorten
it, use the pattern edit De-
lete Measure (p. 45) to de-
lete one or more measures.
Rec Velocity
REAL, 1–127
Volume (velocity) of the
notes that you input from the
velocity pads.
notes that you input from the
velocity pads.
If this is set to REAL, your
playing strength on the
pads will determine the ve-
locity that is input.
playing strength on the
pads will determine the ve-
locity that is input.
[F1 (Patch List)]
[F3 (Mixer)]
(Part Mixer)
(Part Mixer)
[F6 (BPM/Click)]
Set the tempo, and turn the metronome on/
off (p. 25).
off (p. 25).
MC-909_Ref_e.book 39 ページ ２００５年３月１日 火曜日 午後３時２９分