Roland MP-70 Benutzerhandbuch
26
Chapter 4. Recording Your Performance
Recording a New Song
Record only the keyboard performance without playing along with an internal song.
fig.panel4-1
Recording settings (select “USr”)
1
Press the [SONG/TEMPO] button, getting its indicator to light in red.
The song number appears in the display for several seconds.
2
Press [-] and [+] buttons simultaneously.
“USr” appears in the display.
Specifying the tone and tempo for recording
3
4
If necessary, turn on the metronome.
5
Press the [REC] button.
The [REC] button’s indicator will light, the [PLAY] button’s indicator will blink, and
you will be in recording-standby mode.
Start recording
6
Recording will start when you either press the [PLAY] button or play the
keyboard.
Two measures of the count sound are played, and the recording begins.
Note that recording will also begin as soon as you play anything on the keyboard,
even if you do not press the [PLAY] button. There is no count sound played when
you start in this manner.
When recording begins, the [PLAY] button and [REC] button indicators will light.
Go ahead and perform on the keyboard.
Stop recording
7
Press the [PLAY] or [REC] button.
Recording will stop, and the indicators for the [PLAY] and [REC] buttons will go dark.
Play back the recorded performance
8
Press the [PLAY] button.
You will hear the recorded performance.
Once again press the [PLAY] button, and playback will stop.
2
6,7,8 5,7
1
3
4
NOTE
If you layer a newly recorded
performance without erasing
the recorded song, the song
tempo and beat will be stored
with the settings that were
recorded first.
performance without erasing
the recorded song, the song
tempo and beat will be stored
with the settings that were
recorded first.
Refer to the previous page if
recording a song that starts
with pickup beats (where the
song begins on a beat other
than the first beat of the
measure).
recording a song that starts
with pickup beats (where the
song begins on a beat other
than the first beat of the
measure).
About the “USr” display
When you stop recording, the
When you stop recording, the
“
” display will change
to “
.”
The “.” in the lower right of the
display indicates that there is
already a recorded
performance.
display indicates that there is
already a recorded
performance.
If you record without
specifying the recording track,
the performance will be
recorded to the [LEFT] button.
If you want to record the right
and left hands separately on
separate recording tracks, refer
to “Recording the Right-Hand
and Left-Hand Parts
Separately” (p. 28).
specifying the recording track,
the performance will be
recorded to the [LEFT] button.
If you want to record the right
and left hands separately on
separate recording tracks, refer
to “Recording the Right-Hand
and Left-Hand Parts
Separately” (p. 28).
MP-70_e.book 26 ページ ２００６年３月２９日 水曜日 午後４時１７分