Roland VK-8 Benutzerhandbuch

Before You Begin Playing

Restoring the Factory Settings (Factory
Reset)

This function resets all the VK-8’s settings to their factory default values.

Make sure that the volume is turned to the minimum position.

Press the lower portion of the VK-8’s [POWER] switch to turn off the

power.

fig.01-07

While holding down the HARMONIC BAR PART [UPPER] [LOWER]

[PEDAL] buttons, press the upper portion of the [POWER] switch to turn

on the power.

Press the HARMONIC BAR PART [UPPER] [LOWER] [PEDAL] buttons

until all of the panel indicators light.

All settings will be restored to what they were when the instrument first left the

factory.

Once the Factory Reset has been completed, all panel indicators will light for several

seconds.

fig.01-07

NOTE

When you perform the Factory

Reset operation, all the data

you created will be lost from

the VK-8’s internal memory. If

the VK-8 contains important

data that you wish to keep, use

the Bulk Dump operation to

save the data on an external

MIDI sequencer, etc. before

you perform the Factory Reset

NOTE

Never turn off the power

while Factory Reset is being

performed.