Zoom MRT-3 Benutzerhandbuch
P l a y i n g M RT- 3 S o u n d s F ro m a n E x t e r n a l M I D I
Component
Component
Using an external MIDI sequencer or MIDI keyboard, you can play the sound sources of the
MRT-3. To do this, the MIDI receive channel setting of the MRT-3 must match the MIDI send
channel of the external device.
MRT-3. To do this, the MIDI receive channel setting of the MRT-3 must match the MIDI send
channel of the external device.
1.
Connect the MIDI OUT jack of the MIDI sequencer or similar to the [MIDI IN]
connector of the MRT-3, using a MIDI cable.
connector of the MRT-3, using a MIDI cable.
2.
In pattern mode, press the [FUNCTION] key and then pad 6 (MIDI).
The clock currently used by the MRT-3 is shown on the display.
3.
Press and hold the [KIT] key.
While the [KIT] key is being pressed, the display shows the current MIDI receive channel
setting (default setting: 10).
setting (default setting: 10).
4.
Use the [VALUE +/-] keys to select the MIDI receive channel.
The MIDI receive channel can be set to OFF (no MIDI messages are received), or 1 – 16.
5.
When the setting is complete, press the [FUNCTION] key again.
The unit returns to the previous mode.
1
1 0
I N T
MIDI sequencer
MIDI OUT
MRT-3
MIDI IN
ZOOM
MRT-3
46
Other
Functions