Zoom MRT-3 Benutzerhandbuch

No sound or very low volume.

• Is the [POWER] switch set to ON?

Turn power on, as described in the section
"Preparations" (page 8).

• Is [OUTPUT] jack connected correctly

to the playback system?

Make connections as described in "Getting
Connected" (page 7).

• Is there a problem with the shielded

cable?

Try using another cable.

• Is the connected playback system

operating normally and is the volume
setting appropriate?

Check the system and make sure that the
level is adjusted properly.

• Is [OUTPUT LEVEL] control of MRT-3

set correctly?

Set the control to a suitable position.

Sound is distorted or intermittent.

• Is output level of MRT-3 set too

high?

Set [OUTPUT LEVEL] control of MRT-3
to a suitable position.

Cannot record pattern.

• Is MRT-3 set to mode other than

pattern mode?

Activate pattern mode (

➝ p. 14).

• Is memory capacity limit reached?

Check remaining memory capacity(

➝ p.

39), and delete unneeded patterns and
songs.

Song cannot be recorded.

• Is MRT-3 set to mode other than

song mode?

Activate song mode (

➝ p. 33).

• Is memory capacity limit reached?

Check remaining memory capacity(

➝ p.

39), and delete unneeded patterns and
songs.

Playback sound is not in stereo.

• Is Y cable connected to [OUTPUT

STEREO/PHONES] jack?

Make connections as described in "Getting
Connected" (page 7).

• Is the panning setting appropriate?

Check whether the pan parameter for the
instrument sounds in the currently used kit
is set properly (

➝ p. 28).

FS01 has no effect.

• Is foot switch connected correctly to

the [FOOT SW] jack?

Make connections as described in "Getting
Connected" (

➝ page 7)

• Is correct function selected for

FS01?

Use [FUNCTION] key and pad 4 (FOOT
SW) to select the proper setting (

➝ p. 42).

ZOOM

MRT-3

Tr
o

bleshooting

Troubleshooting

Check the following items first if there seems to be a problem with the MRT-3.