Zoom MRT-3 Benutzerhandbuch

For mono playback, 
connect a mono cable 
to the [OUTPUT 
MONO] jack.

For stereo playback, connect a Y cable 
to the [OUTPUT STEREO/PHONES] 
jack and plug the other end of the 
cable into the L/R channel inputs of an 
audio system or two channels of a 
mixer assigned to left and right 
positions.

To monitor the sound with 
headphones, plug the phones into the 
[OUTPUT STEREO/PHONES] jack.

If you connect the optional 
foot switch FS01 to the 
[FOOT SW] jack, you can 
control start/stop and switch 
the sound of the MRT-3 with 
your foot.

To synchronize the unit with a MIDI 
sequencer/recorder that has a MIDI 
clock output, connect a MIDI cable 
from the MIDI OUT connector of 
the device to the [MIDI IN] 
connector of the MRT-3.

MIDI OUT

AUX IN