Roland RG-3F Benutzerhandbuch

Seite von 100
 
20
 
Getting Ready
 
1.
 
Turn the [Volume] knob to adjust the overall volume.
 
2.
 
Turn the [Brilliance] knob to adjust the brightness of the 
sound.
 
fig.Vol_adjust_e.eps
 
The mark at the top of the [Volume] knob indicates the 
volume level typically produced by an acoustic piano. 
This is usually the most appropriate volume for your 
piano performances.
The pedals perform the following operations. You’ll use them 
mainly when playing piano.
 
fig.pedalName_e.eps
 
Damper Pedal (right pedal)
 
Use this pedal to sustain the sound.
While this pedal is held down, notes will be sustained for an 
extended time even if you release your fingers from the 
keyboard.
The length of sustain will change subtly depending on how 
deeply you press the pedal.
When you press the damper pedal of an acoustic piano, a 
slight noise is heard when the damper frees the strings, and 
a richly spacious resonance is added by the strings that 
vibrate in sympathy with the strings of the notes you actually 
play. The RG-1F/RG-3F replicates the sound created when 
the damper releases the string (“damper noise”) and the 
sympathetic vibration (“damper resonance”).
 
You can modify the sound of the damper releasing the 
 
Sostenuto Pedal (center pedal)
 
The notes you are pressing when this pedal is depressed will 
be sustained.
 
Soft Pedal (left pedal)
 
This pedal is used to make the sound softer.
Playing with the soft pedal depressed produces a sound that 
is not as strong as when otherwise played with the 
equivalent strength. This is the same function as the left 
pedal of an acoustic piano.
The softness of the tone can be varied subtly by the depth to 
which you press the pedal.
 
You can switch the function of the sostenuto pedal and 
 
If you move the piano (RG-1F)
 
If you move the piano to a different 
location, be sure to adjust the 
adjuster knob located under the 
pedals.
Turn the adjuster to lower it so that it 
firmly contacts the floor.
If there is a gap between the adjuster and the floor, the piano 
may be unstable or the pedal may be damaged. In particular 
when placing the piano on a carpeted surface, make sure that the 
adjuster is firmly pressing down on the floor.
 
Adjusting the Sound’s Volume and 
Brilliance
Using the Pedals
Min
Max
Mellow
Bright
Soft Pedal
Sostenuto Pedal
Damper Pedal
Adjuster knob
RG-1F3F_e.book 20 ページ 2010年1月19日 火曜日 午前9時1分