Roland RG-3F Benutzerhandbuch
75
Connecting to Other Devices
If you connect the RG-1F/RG-3F to powered speakers or to an
audio system that has line input jacks, you’ll be able to hear the
RG-1F/RG-3F’s sound from your powered speakers or audio
system. If you connect your portable audio player or other audio
playback device to the RG-1F/RG-3F, you’ll be able to hear its
sound via the RG-1F/RG-3F.
Use audio cables (commercially available) to make connections.
When connection cables with resistors are used, the
volume level of equipment connected to the inputs
jacks may be low. If this happens, use connection cables
that do not contain resistors.
921
To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn
off the power on all devices before making any
connections.
fig.Output-SP_e.eps
1.
Turn the volume all the way down on the RG-1F/RG-3F
and on the speaker.
2.
Turn off the power to the RG-1F/RG-3F and speakers.
3.
Use audio cables (commercially available) to make the
connection.
4.
Switch on the RG-1F/RG-3F.
5.
Switch on the connected speakers.
6.
Adjust the volume level on the RG-1F/RG-3F and the
connected speakers.
When you play the RG-1F/RG-3F’s keyboard, the sound is
played from the RG-1F/RG-3F’s and connected speakers.
Turning Off the Power
1.
Turn the volume all the way down on the RG-1F/RG-3F
and on the connected speakers.
2.
Turn off the connected speakers.
3.
Turn off the RG-1F/RG-3F.
Connecting to Audio Equipment
Connecting Speakers to the RG-1F/RG-3F and
Outputting Sounds
Outputting Sounds
Audio Set etc.
RG-1F3F_e.book 75 ページ ２０１０年１月１９日 火曜日 午前９時１分