Roland RG-3F Benutzerhandbuch

 

Connecting to Other Devices

 

If you use a commercially available USB cable to connect the 

RG-1F/RG-3F’s USB connector to a USB connector on your 

computer, you’ll be able to do the following things.

• Use the RG-1F/RG-3F to play SMF music file that’s played 

back by your MIDI-compatible software.

• Exchange MIDI data between the RG-1F/RG-3F and your 

sequencer software to allow more sophisticated music 

production and editing possibilities.

Connect the RG-1F/RG-3F to your computer as shown below.

 

fig.USB-PC_e.eps

 

* Refer to the Roland website for system requirements.

Roland website: 

 

Normally, you don’t need to install a driver in order to connect 

the RG-1F/RG-3F to your computer. However, if some problem 

occurs, or if the performance is poor, using the Roland original 

driver may solve the problem.

For details on downloading and installing the Roland original 

driver, refer to the Roland website.

Roland website: 

 

Specify the USB driver you want to use, and then install the 

 

Connecting a Computer

Computer

USB 

connector

921

• To prevent malfunction and/or damage to speakers or 

other devices, always turn down the volume, and turn 

off the power on all devices before making any 

connections.

• Only MIDI data can be transmitted using USB.

• USB cables are not included. Consult your Roland dealer 

if you need to purchase.

• Turn on the power to the RG-1F/RG-3F before starting 

up MIDI applications on the computer. Do not turn the 

RG-1F/RG-3F on or off while any MIDI application is 

running.

RG-1F3F_e.book 78 ページ ２０１０年１月１９日　火曜日　午前９時１分