National Instruments cFP-Al-110 Benutzerhandbuch
FP-AI-110 and cFP-AI-110
18
ni.com
CE Compliance
This product meets the essential requirements of applicable
European Directives, as amended for CE marking, as follows:
European Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)......... 73/23/EEC
Electromagnetic Compatibility
Directive (EMC) ............................... 89/336/EEC
Directive (EMC) ............................... 89/336/EEC
Note
Refer to the Declaration of Conformity (DoC) for
this product for any additional regulatory compliance
information. To obtain the DoC for this product, visit
information. To obtain the DoC for this product, visit
ni.com/certification
, search by model number or
product line, and click the appropriate link in the
Certification column.
Certification column.
Mechanical Dimensions
Figure 8 shows the mechanical dimensions of the FP-AI-110
installed on a terminal base. If you are using the cFP-AI-110,
refer to the Compact FieldPoint controller user manual for the
dimensions and cabling clearance requirements of the Compact
FieldPoint system.
installed on a terminal base. If you are using the cFP-AI-110,
refer to the Compact FieldPoint controller user manual for the
dimensions and cabling clearance requirements of the Compact
FieldPoint system.
Figure 8. FP-AI-110 Mechanical Dimensions
109.5
[4.31]
[4.31]
91.44
[3.60]
[3.60]
107.19
[4.22]