DHD Power Cruiser 52 Benutzerhandbuch
Version 1.1.0 - 14.12.2009
10
Assembling and Wiring the Hardware
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
5.2
Calculating the Power Consumption
The following facts are important for the choice of power supply units for 52/RX Mixing Consoles.
·
Use two 52-5048 power supply units for larger mixers with redundancy option inside the 52-5081 or 52-5083 power
supply frames. The maximum power consumption in total is 200W.
supply frames. The maximum power consumption in total is 200W.
·
Use two 52-5048 power supply units for several smaller mixers with redundancy option inside the 52-5081 or 52-
5083 power supply frames. The maximum power consumption in total is 200W.
5083 power supply frames. The maximum power consumption in total is 200W.
·
You may also use two 52-5047 power supply units for smaller mixers with redundancy option inside the 52-5081 or
52-5083 power supply frames. The maximum power consumption in total is 100W.
52-5083 power supply frames. The maximum power consumption in total is 100W.
·
Use the 52-4048 desktop power supply for smaller mixers in non redundant installations. The maximum power
consumption in total is 100W.
consumption in total is 100W.
·
PoE switches are not included in all 52/RX fader and control modules or table installation frames.
·
Use 52-4080 PoE switches mounted close to the console or 52-5088 PoE switches inside the 52-5083 power supply
frames.
frames.
Important
There are two 48V connectors on each 52-4080 PoE switch. At revision A of the
PoE switch (52-4080A), the second speakon connector can be used to chain to
another 52-4080. Do not connect two power supplies to a 52-4080A to achieve
redundant power supply! There is no diode included in the 52-4080A!
PoE switch (52-4080A), the second speakon connector can be used to chain to
another 52-4080. Do not connect two power supplies to a 52-4080A to achieve
redundant power supply! There is no diode included in the 52-4080A!
Revision B of the PoE switch (52-4080B) provides the option to connect a
redundant power supply to the module. Nevertheless, in revision B it is still
possible to connect through the PoE switch to another PoE switch. Please take
care about the internal wiring!
redundant power supply to the module. Nevertheless, in revision B it is still
possible to connect through the PoE switch to another PoE switch. Please take
care about the internal wiring!