Korg PA50 Benutzerhandbuch

Filter/Dynamic

When “LFO Waveform” is set to Random, the “LFO Step
Freq” parameter uses a random LFO cycle.

b: LFO Phase [degree]
Offsetting the left and right phases alters how modula-
tion is applied to the left and right channels, creating a
swelling affect.

e: BPM, f: Step Base Note, f: Times
The width of an LFO step, or a cycle of random LFO, is
obtained by multiplying the length of a note (

…

)

(selected for “Step Base Note”, in relation to the tempo
specified in “BPM,” or the MIDI Clock tempo if “BPM” is
set to MIDI) by the number specified in the “Times”
parameter.
j: Wet/Dry
The effect sound’s phase will be reversed when you set
this parameter in the range of values from –Wet to –1:99.

This effect is a combination of the Exciter, which adds a
punch to the sound and the Enhancer, which adds spread and
presence.

a: Exciter Blend
This parameter sets the depth (intensity) of the Exciter
effect. Positive values give a frequency pattern (to be
emphasized) different from negative values.
b: Emphatic Point
This parameter sets the frequency to be emphasized.
Higher values will emphasize lower frequencies.
c: Enhancer Dly L [msec], d: Enhancer Dly R [msec]
These parameters set the delay time for the Enhancer left
and right channel. Specifying a slightly different delay
time for the left and right channel will add a stereo
image, depth, and width to the sound.

a

Exciter Blend
Sets the intensity (depth) of the Exciter effect

–100...+100

☞

,

Src

Off...Tempo

Selects the modulation source of the Exciter intensity

Amt

–100...+100

Sets the modulation amount of the Exciter intensity

b

Emphatic Point
Sets the frequency to be emphasized

0...70

☞

,

Src

Off...Tempo

Selects the modulation source of the frequency to be emphasized

Amt

–70...+70

Sets the amount of modulation of the frequency to be emphasized

c

Enhancer Dly L (Enhancer Delay L) [msec]
Sets the delay time for the Enhancer left channel

0.0...50.0msec

☞

d

Enhancer Dly R (Enhancer Delay R) [msec]

0.0...50.0msec

Sets the delay time for the Enhancer right channel

☞

e

Enhancer Depth

0...100

Sets the determines to what degree the Enhancer effect is applied

Src

Off...Tempo

Selects the modulation source of the Enhancer width

Amt

–100...+100

Sets the modulation amount of the Enhancer width

f

EQ Trim
Sets the 2-band EQ input level

0...100

g

Pre LEQ Gain [dB]
Table , “Sets the gain of Low EQ,” on page 176

–15.0...+15.0dB

Pre HEQ Gain [dB]
Table , “Sets the gain of High EQ,” on page 176

–15.0...+15.0dB

h

Wet/Dry

Dry, 1:99...99:1, Wet

Src

Off...Tempo

Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175

–100...+100