Boss Audio Systems RC-300 Benutzerhandbuch

Here you can make settings for using the RC-300 connected with an external MIDI device or with a second RC-300 unit.

For details on MIDI, refer to “Connecting an External MIDI Device or Another RC-300 Unit” (p. 38).

1–16

This procedure sets the MIDI channel used for receiving MIDI messages.

OFF

Messages will be received only on the channel specified by the MIDI Receive Channel

setting.

ON

Messages are received via all MIDI channels, regardless of the MIDI Receive Channel

settings.

1–16

This procedure sets the MIDI channel used for transmitting MIDI messages.

Rx

The MIDI transmit channel will be the same as the MIDI receive channel.

Two RC-300 units can be synchronized after connecting them together using a MIDI cable. For details, refer to

“Connecting Two RC-300 Units” (p. 39). The “MIDI Sync” setting allows two RC-300 units to play back in synchronization

at the same tempo.

RC-300 (Master unit)

RC-300 (Slave unit)

MIDI OUT connector

MIDI IN connector

For more detailed information about MIDI and synchronization, refer to “MIDI settings” (p. 38).

MEMORY

The RC-300 will use the MIDI sync setting (p. 21) that’s specified by the phrase memory.

INTERNAL

This RC-300 unit will operate at its own specified phrase memory tempo. Choose the

“INTERNAL” setting if you’re using the RC-300 by itself, or if this is the master RC-300 unit.

MIDI

This RC-300 unit will synchronize to MIDI data received from the master RC-300 unit.

Choose the “MIDI” setting for the slave RC-300 unit.

OFF

MIDI program change messages will not be transmitted.

ON

MIDI program change messages will be transmitted.