Ampeg PBC228 Benutzerhandbuch
Ampeg reserves the right to change specifications without notice.
Made with Pride in the U.S.A. by Ampeg • ©2005 SLM Electronics, 1400 Ferguson Avenue, St. Louis, MO 63133 U.S.A.
P/N 47-053-41 • 040405
PBC228 P
orta
B
ass Amplifier
Technical Specifications
OUTPUT POWER RATING
200 Watts RMS, internal speaker load
TONE CONTROLS
Ultra Low:
+6dB @ 40Hz
Low:
±16dB @ 100Hz
Mid:
±17dB @ Selected Frequency
Mid Freq:
180Hz - 1.8kHz
High:
±15dB @ 5kHz
Ultra High:
+8dB @ 10kHz
GAIN
65dB
SIGNAL TO NOISE RATIO
80dB typical
INTERNAL SPEAKERS
(2) 8”Neodymium, 8 ohm, 150 W, 2” vcd
LINE POWER REQUIREMENTS
50VA
SIZE AND WEIGHT
16.25” W x 16.25” H x 11” D; 31 lbs.
www.ampeg.com
Declaration of Conformity
Manufacturer’s Name: SLM Electronics
Corporate Headquarters: 1901 Congressional Drive, St. Louis, Missouri 63146
Primary Production Facility: 700 Hwy 202 W, Yellville, Arkansas, 72687
Product Type: Audio Amplifier
Products meet the regulations for compliance marking under:
ETL standards UL6500, UL60065, or UL813
CSA standards E60065 or C22.2 No.1-M90
CE safety standard EN60065
CE EMC standards EN55103 or EN55013 and EN61000
C-tick designation Level 2, ABN #56748810738, ARBN# N222
KETI standard K60065 (limited model approval)
CSA standards E60065 or C22.2 No.1-M90
CE safety standard EN60065
CE EMC standards EN55103 or EN55013 and EN61000
C-tick designation Level 2, ABN #56748810738, ARBN# N222
KETI standard K60065 (limited model approval)
Compliance Support Contact: SLM Electronics, Attn: R&D Compliance Engineer
1901 Congressional Drive, St Louis, Missouri, 63146 • Tel.: 314-569-0141, Fax: 314-569-0175