Roland CUBE 40XL Benutzerhandbuch

(for CUBE-80XL only)
Connect mains plug of this model to a mains 

socket outlet with a protective earthing 

connection.
Do not open or perform any internal modifica-

tions on the unit.
Do not attempt to repair the unit, or replace 

parts within it (except when this manual 

provides specific instructions directing you 

to do so). Refer all servicing to your retailer, 

the nearest Roland Service Center, or an 

authorized Roland distributor, as listed on the 

“Information” page.
Never install the unit in any of the following 

locations.
•  Damp (e.g., baths, washrooms, on wet floors); 

or are

•  Exposed to steam or smoke; or are
•  Subject to salt exposure; or are
•  Humid; or are
•  Exposed to rain; or are
•  Dusty or sandy; or are
•  Subject to high levels of vibration and 

shakiness.

Make sure you always have the unit placed 

so it is level and sure to remain stable. Never 

place it on stands that could wobble, or on 

inclined surfaces.
The unit should be connected to a power 

supply only of the type described as marked 

on the rear side of unit.
Do not excessively twist or bend the power 

cord, nor place heavy objects on it. Doing 

so can damage the cord, producing severed 

elements and short circuits. Damaged cords 

are fire and shock hazards!
This unit, either alone or in combination with 

an amplifier and headphones or speakers, 

may be capable of producing sound levels 

that could cause permanent hearing loss. Do 

not operate for a long period of time at a high 

volume level, or at a level that is uncomfort-

able. If you experience any hearing loss or 

ringing in the ears, you should immediately 

stop using the unit, and consult an audiologist.
Do not place containers containing liquid on 

this product. Never allow foreign objects (e.g., 

flammable objects, coins, wires) or liquids (e.g., 

water or juice) to enter this product. Doing so 

may cause short circuits, faulty operation, or 

other malfunctions.

Immediately turn the power off, remove the 

power cord from the outlet, and request servic-

ing by your retailer, the nearest Roland Service 

Center, or an authorized Roland distributor, as 

listed on the “Information” page when:
•  The power-supply cord or the plug has been 

damaged; or

•  If smoke or unusual odor occurs
•  Objects have fallen into, or liquid has been 

spilled onto the unit; or

•  The unit has been exposed to rain (or 

otherwise has become wet); or

•  The unit does not appear to operate 

normally or exhibits a marked change in 

performance.

In households with small children, an adult 

should provide supervision until the child is 

capable of following all the rules essential for 

the safe operation of the unit.
Protect the unit from strong impact.
(Do not drop it!)
(for CUBE-80XL only)
A small amount of heat will radiate from the 

unit during normal operation. Do not use the 

unit in an area with less than the air space 

shown below.

30 cm (12 in.) 

or greater

20 cm (8 in.) 

or greater

20 cm (8 in.) 

or greater

5 cm (2 in.) 

or greater

15 cm (6 in.) 

or greater

 Front

Side

Do not force the unit’s power-supply cord to 

share an outlet with an unreasonable number 

of other devices. Be especially careful when 

using extension cords—the total power used 

by all devices you have connected to the 

extension cord’s outlet must never exceed the 

power rating (watts/amperes) for the extension 

cord. Excessive loads can cause the insulation 

on the cord to heat up and eventually melt 

through.
Before using the unit in a foreign country, 

consult with your retailer, the nearest Roland 

Service Center, or an authorized Roland 

distributor, as listed on the “Information” page.

The unit should be located so that its location 

or position does not interfere with its proper 

ventilation.
Always grasp only the plug on the 

power-supply cord when plugging into, or 

unplugging from an outlet.
At regular intervals, you should unplug the 

power plug and clean it by using a dry cloth to 

wipe all dust and other accumulations away 

from its prongs. Also, disconnect the power 

plug from the power outlet whenever the unit 

is to remain unused for an extended period of 

time. Any accumulation of dust between the 

power plug and the power outlet can result in 

poor insulation and lead to fire.
Try to prevent cords and cables from becoming 

entangled. Also, all cords and cables should be 

placed so they are out of the reach of children.

Never climb on top of, nor place heavy objects 

on the unit.

Never handle the power cord or its plug with 

wet hands when plugging into, or unplugging 

from, an outlet.
Before moving the unit, disconnect the power 

plug from the outlet, and pull out all cords 

from external devices.
Before cleaning the unit, turn off the power 

and unplug the power cord from the outlet 

(p. 7).
Whenever you suspect the possibility of 

lightning in your area, pull the plug on the 

power cord out of the outlet.
The cooling vents on the rear side of the unit 

may become hot, so take care to avoid burns.
Do not remove the speaker grille and speaker 

by any means. Speaker not user replaceable. 

Shock hazardous voltages and currents are 

present inside the enclosure.

USING THE UNIT SAFELY

Used for instructions intended to alert the 
user to the risk of injury or material 
damage should the unit be used 
improperly. 
* Material damage refers to damage or 

other adverse effects caused with 
respect to the home and all its 
furnishings, as well to domestic animals 
or pets. 

Used for instructions intended to alert the 
user to the risk of death or severe injury 
should the unit be used improperly. 

The       symbol alerts the user to things that must be 
carried out. The specific thing that must be done is 
indicated by the design contained within the circle. In the 
case of the symbol at left, it means that the power-cord 
plug must be unplugged from the outlet. 

The       symbol alerts the user to important instructions or 
warnings.The specific meaning of the symbol is 
determined by the design contained within the triangle. In 
the case of the symbol at left, it is used for general 
cautions, warnings, or alerts to danger. 

The       symbol alerts the user to items that must never be 
carried out (are forbidden). The specific thing that must 
not be done is indicated by the design contained within 
the circle. In the case of the symbol at left, it means that 
the unit must never be disassembled. 

About       WARNING and       CAUTION Notices

About the Symbols