Panasonic AV-HS410N Benutzerhandbuch

25

POSITIONER

X/Y

Z







These are used when performing the settings below.

 

 PinP1, PinP2 position settings

 

 Wipe start position setting

Target patterns:
WIPE1:  5
WIPE2:  4, 5, 6, 7
SQ1: 

5

SQ2: 

4, 5, 6, 7

  Refer to “1‑2. Wipe” (<Operations and Settings> 

Operating Instructions).

 

 Flying key position setting

 

 Chroma key marker position setting

In each case, the settings take effect only when the 
following menu items have been selected.

During the time it takes for the unit to start up after its 
power is turned on, the unit detects the positions of the 
positioners and sets them to their center positions.
Do not touch the positioners until the unit has started up.



This is used to set the PinP size, flying key size or to select 
the chroma key area. 
In each case, the settings take effect only when the 
following menu items have been selected.

Position adjustments

Size adjustments
(size increased by rotating the 
encoder clockwise and reduced 
by rotating it counterclockwise)

Hold switch down to restore 
initial values (X/Y, Z).

All PinP1 and PinP2 menus 

Start position 
adjustments

 —

Hold switch down to restore 
initial values (X/Y).

Background/WIPE Position
Background/SQ Position

Start position 
adjustments

 —

Hold switch down to restore 
initial values (X/Y).

Key/WIPE Position
Key/SQ Position

Selection position 
adjustments

Selected area size adjustments
(size increased by rotating the 
encoder clockwise and reduced 
by rotating it counterclockwise)

Execute sampling

Chroma Key/Sample1
Chroma Key/Sample2

Position adjustments

Size adjustments
(size increased by rotating the 
encoder clockwise and reduced 
by rotating it counterclockwise)

Hold switch down to restore 
initial values (X/Y, Z).

Key: Flying Key