Stanton M.303 Benutzerhandbuch
Removing a fader:
1. Make sure mixer is powered off and power supply is disconnected from
back of mixer.
2. Remove the fader to be cleaned or replaced by unscrewing the 2 outer
screws on the fader plate (removing the 2 inner screws will detach the
fader from the fader plate).
fader from the fader plate).
3. Disconnect the fader from mixer by removing the connector on the
bottom of the fader.
Installing a fader:
1. Once original fader has been removed, simply plug the 4-pin
connector into the new fader.
2. Place fader back in mixer and replace 2 outer screws to secure fader.
After constant use the faders may need to be cleaned and lubricated
from time to time. This will ensure long life and keep a smooth feeling
throughout the fader's lifetime. Follow the instructions below to lubricate
and clean your faders:
from time to time. This will ensure long life and keep a smooth feeling
throughout the fader's lifetime. Follow the instructions below to lubricate
and clean your faders:
FA D E R C L E A N I N G A N D I N S TA L L