Zoom G2.1NU Benutzerhandbuch

26

The foot switch can be set to one of the following 

functions. 

BP/MT 

Set the unit to bypass/mute. 

BANK UP  Increase the bank number by one 

with each press of the foot switch. 

RHYTHM  Turn Rhythm mode ON/OFF.

BPM TAP  Set the tempo used for the rhythm, 

looper and effect by pressing the 

foot switch repeatedly at the 

desired tempo. 

DL TAP 

Set the Time parameter of the 

DELAY module by pressing the

foot switch repeatedly. 

DL HOLD  Turn hold delay ON/OFF. Hold 

delay is a function that allows the 

delay sound to be repeated without 

decay (see the illustration below).

DL MUTE  Turn the DELAY module's input

mute ON/OFF. 

To use DL TAP, DL HOLD or DL MUTE, you

must turn the DELAY module ON.

The foot switch function setting affects all 

patches. Moreover, this setting is saved even 

when the power is turned OFF. 

You can connect an optional foot switch to the CONTROL IN jack, and use it to control additional settings of the unit
with your feet, for example, by changing banks and operating effects. 

Sound

source

Delay sound

Press the foot switch

Hold

Press again

Foot switch function