Troy-Bilt E683G Benutzerhandbuch

5

Various symbols (shown here, with word 

descriptions) are used on the tiller and engine.  

Your unit may not have all of the symbols. 

STOP

Decals

For your safety and the safety of others, 

various safety and operational decals are 

located on your unit (Figure 1).
Keep the decals clean and legible at all 

times.  Contact your local service dealer or 

the Factory for replacements if any decals 

are damaged or missing.

Refer to the Parts List for decal locations, 

descriptions and part numbers.

Maintenance and Storage

1. Keep the tiller, attachments and acces-

sories in safe working condition.
2. Check all nuts, bolts, and screws at 

frequent intervals for proper tightness to 

be sure the equipment is in safe working 

condition.
3. Never store the tiller with fuel in the 

fuel tank inside a building where ignition 

sources are present such as hot water 

and space heaters, furnaces, clothes 

dryers, stoves, electric motors, etc.).  

Allow engine to cool before storing in any 

enclosure.

4. To reduce the chances of a fire hazard, 

keep the engine free of grass, leaves, or 

excessive grease.
5. Store gasoline in a cool, well-venti-

lated area, safely away from any spark- 

or flame-producing equipment. Store 

gasoline in an approved container, safely 

away from the reach of children.
6. Refer to the Maintenance sections 

of this Manual and the separate Engine 

Owner’s Manual for instructions if the 

tiller is to be stored for an extended 

period.

7. Never perform maintenance while the 

engine is running or the spark plug wire 

is connected, except when specifically 

instructed to do so.
8. If the fuel tank has to be drained, do 

this outdoors.

WARNING