Sears 917.29149 Benutzerhandbuch

Seite von 20
17
Will not start           1.   Out of fuel.                               1.   Fill fuel tank.
                                 2.   Engine not “CHOKED”             2.   See “TO START ENGINE”  
                                       properly.                                         in the Operation section.
                                 3.   Engine fl ooded.                        3.   Wait several minutes before  
                                                                                             attempting to start.
                                 4.   Dirty air clean er.                      4.   Clean or re place air cleaner  
                                                                                             cartridge.
                                 5.   Water in fuel.                           5.   Empty fuel tank and carbure- 
                                                                                             tor, and refi ll tank with fresh  
                                                                                             gasoline.
                                 6.   Clogged fuel tank.                    6.   Remove fuel tank and clean.
                                 7.   Loose spark plug wire.             7.   Make sure spark plug wire is  
                                                                                             seated properly on plug.
                                 8.   Bad spark plug or                    8.   Replace spark plug or adjust 
                                       improper gap.                                gap.
                                 9.   Carburetor out of adjust-          9.   Make nec es sary adjust- 
                                        ment.                                             ments. 
   
Hard to start            1.   Throttle control not set             1.   Place throttle con trol in  
                                       properly.                                         “FAST” position.
                                 2.   Dirty air  clean er.                     2.   Clean or re place air cleaner  
                                                                                             cartridge. 
 
                                 3.   Bad spark plug or                    3.   Replace spark plug or adjust 
                                       improper gap.                                gap.
                                 4.   Stale or dirty fuel.                    4.   Empty fuel tank and refi ll tank 
                                                                                             with fresh clean gasoline.
                                 5.   Loose spark plug wire.             5.   Make sure spark plug wire is  
                                                                                             seated prop er ly on plug.
                                 6.   Carburetor out of                     6.   Make necessary adjust- 
                                       adjustment.                                    ments. 
 
 
                                                                                       
Loss of power         1.   Engine is overloaded.              1.   Set depth stake and wheels 
                                                                                             for shallower tilling.
                                 2.   Dirty air cleaner.                      2.   Clean or replace air cleaner  
                                                                                             cartridge.
                                 3.   Low oil level/dirty oil.                3.   Check oil level/change oil.
                                 4.   Faulty spark plug.                    4.   Clean and regap or change  
                                                                                             spark plug.
                                 5.   Oil in fuel.                                 5.   Empty and clean fuel tank  
                                                                                             and refi ll, and clean carbure- 
                                                                                             tor.
                                 6.   Stale or dirty fuel.                    6.   Empty fuel tank and refi ll tank 
                                                                                             with fresh clean gasoline 
                                 7.   Water in fuel.                           7.   Empty fuel tank and carbure- 
                                                                                             tor, and refi ll tank with fresh  
                                                                                             gasoline.
                                 8.   Clogged fuel tank.                    8.   Remove fuel tank and clean.
                                 9.   Spark plug wire loose.             9.   Connect and tighten spark  
                                                                                             plug wire.
                                 10. Dirty engine air screen.           10.Clean engine air screen.
                                 11.  Dirty/clogged muffl er.             11. Clean/replace muf fl er.
                                 12.  Carburetor out of                    12. Make nec es sary adjust- 
                                         adjustment.                                   ments. 
 
 
                                 13.  Poor com pres sion.                 13. Contact a Sears or other  
                                                                                              qualifi ed service center.
PROBLEM                  CAUSE                                         CORRECTION 
TROUBLESHOOTING CHART: 
See ap pro pri ate section in manual un less di rect ed to Sears service center