Sears 917.29425 Benutzerhandbuch

6

carton

_1

Handle 
Assembly

Shift Rod

CAUTION: Be careful of exposed sta-

ples when handling or disposing of carton-
ing material.
IMPORTANT: When unpacking and 
as sem bling tiller, be careful of exposed 
sta ples when handling or disposing of 
cartoning material.
1.   While holding handle assembly, cut ca ble 

ties se cur ing handle assembly to top 
frame.  Let handle assembly rest on tiller.

2.   Remove top frame of carton.
3.   Slowly ease handle assembly up and 

place on top of carton.

4.   Cut down right hand front and right 

hand rear cor ners of carton, lay side 
car ton wall down.

5.   Remove packing material from handle 

assembly.

6.   Separate shift rod from handle as-

 sem bly.

Handle As sem bly

Gearcase Notch

Handle Lock

INSTALL HANDLE
1.   Insert one handle lock (with teeth fac-

 ing outward) in gearcase notch.  (Apply 
grease on smooth side of handle lock 
to aid in keeping lock in place until 
han dle assembly is lowered into po-
 si tion.)

2.   Grasp handle assembly.  Hold in “up” 

po si tion.  Be sure handle lock remains 
in gearcase notch.  Slide handle as-
 sem bly into position.

3.   Rotate handle assembly down.  Insert 

rear carriage bolt fi rst, with head of 
bolt on L.H. side of tiller and loosely as-
 sem ble locknut.

overhead_views_10

Your new tiller has been assembled at the factory with the exception of those parts left 
unassembled for shipping purposes.  To ensure safe and proper operation of your tiller 
all parts and hard ware you assemble must be tight ened securely.  Use the cor rect tools 
as necessary to insure proper tight ness.

A socket wrench set will make assembly 
easier.  Stan dard wrench sizes are listed.
(1) Utility knife
(1) Wire cutter
(1) Tire pressure gauge
(1) Screwdriver
(1) Pair of pliers
(1) 9/16" wrench

When right or left hand is mentioned in 
this man ual, it means when you are in the 
operating po si tion (standing behind tiller 
handles).