Jacuzzi J - 355 Benutzerhandbuch

Remove and clean the headrest pillows as needed with soapy water 

using a cloth or soft-bristle brush. Always remove the pillows when 

adding chemical shock treatment to the spa water. When the sanitizer 

reading is below 4.0 ppm, pillows can be reinstalled.

CauTIon: Never attempt to remove the pillows by pulling on 

the complete assembly! The pillows utilize a bolt-on design 

that prohibits removal without tools.

!

To remove pillows:

1.  Grasp pillow insert (A) with finger tips and 

gently pry outward from pillow base (C).

2.  Use a standard screwdriver to loosen and 

remove mounting bolts (B) from pillow 

base.

3.  Assemble in reverse order after cleaning. 

DO NOT overtighten pillow mounting 

bolts!

To preserve the sheen of your spa’s surface, it is crucial that you avoid 

using abrasive cleaners or cleaners which have adverse chemical effect 

on the surface. If you are not certain as to the suitability of a particular 

cleanser, consult your authorized Jacuzzi dealer. Regardless of the 

cleanser used, use extreme care to assure that no soap residue is left on 

the surface. This could cause severe sudsing when the spa is refilled.
12.5  maintaining the Cover

Using the Jacuzzi insulating spa cover anytime the spa is not in use will 

significantly reduce your operating costs, heat-up time and maintenance 

requirements. To prolong the life of the cover, handle it with care and 

clean it regularly using mild soap and water. Periodic treatments with a 

special conditioner developed for Jacuzzi spa covers will help protect 

against deterioration caused by UV rays from the sun. Never allow 

anyone to stand or sit on the cover, and avoid dragging it across rough 

surfaces. 

Your new spa’s synthetic cabinet requires little or no maintenance of 

any kind. To clean, simply wipe cabinet with a clean towel and mild soap 

solution.