Ridgid R82001 Benutzerhandbuch
17
CHUCK REMOVAL
See Figures 13, 14, and 15.
The chuck must be removed in order to use some acces-
sories. To remove:
n
The chuck must be removed in order to use some acces-
sories. To remove:
n
Lock the switch trigger by placing the direction of ro-
tation selector in center position. See Figure 4.
tation selector in center position. See Figure 4.
n
Insert a 5/16 in. or larger hex key into the chuck of the
drill and tighten the chuck jaws securely.
drill and tighten the chuck jaws securely.
n
Tap the hex key sharply with a mallet in a clockwise
direction. See Figure 13. This will loosen the screw in
the chuck for easy removal.
direction. See Figure 13. This will loosen the screw in
the chuck for easy removal.
n
Open the chuck jaws and remove the hex key. Remove
the chuck screw by turning it in a clockwise direction.
See Figure 14.
the chuck screw by turning it in a clockwise direction.
See Figure 14.
Note: The screw has left hand threads.
n
Insert the hex key in the chuck and tighten chuck jaws
securely. Tap sharply with a mallet in a counterclockwise
direction. This will loosen the chuck on the spindle. It
can now be unscrewed by hand. See Figure 15.
securely. Tap sharply with a mallet in a counterclockwise
direction. This will loosen the chuck on the spindle. It
can now be unscrewed by hand. See Figure 15.
TO RETIGHTEN A LOOSE CHUCK
The chuck may become loose on spindle and develop a
wobble. Periodically check chuck screw for tightness.
To tighten:
n
wobble. Periodically check chuck screw for tightness.
To tighten:
n
Lock the switch trigger by placing the direction of ro-
tation selector in center position. See Figure 4.
tation selector in center position. See Figure 4.
n
Open the chuck jaws.
n
Insert the hex key into the chuck and tighten chuck
jaws securely. Tap the hex key sharply with a mallet in
a clockwise direction. This will tighten the chuck on the
spindle. See Figure 13.
jaws securely. Tap the hex key sharply with a mallet in
a clockwise direction. This will tighten the chuck on the
spindle. See Figure 13.
n
Open the chuck jaws and remove the hex key.
n
Tighten the chuck screw.
Note: The chuck screw has left hand threads.
Fig. 14
Fig. 15
Fig. 13
MAINTENANCE
CHUCK JAWS
MALLET
KEYLESS
CHUCK
HEX KEY
SCREWDRIVER