Ridgid R82001 Benutzerhandbuch

8

Before using this tool, familiarize yourself with all operat-
ing features and safety requirements. However, do not let 
familiarity with the tool make you careless.

This new drill-driver is equipped with the following features. 
See Figure 1.

The drill-driver has a keyless chuck that allows you to hand 
tighten or release drill bit in the chuck jaws.

The drill-driver has a conveniently located variable speed 
switch.

The switch trigger can be locked in the OFF position. This 
feature  helps  reduce  the  possibility  of  accidental  starting 
when not in use.

The  drill-driver  has  a  two-speed  gear  train  designed  for 
drilling or driving at LO (1) or HI (2) speeds. A slide switch 
is located on top of your drill to select either LO (1) or HI 
(2) speed.

(DIRECTION OF ROTATION SELECTOR)
The drill-driver has a forward/reverse selector located above 
the switch trigger.

When not in use, bits provided with the drill-driver can be 
placed in the storage area located on the rear of the motor 
housing.

The charger has a "key hole" hanging feature for convenient, 
space saving storage. Screws should be installed so that 
center distance is 4-1/8 in.