Woodstock W1667 Benutzerhandbuch
Figure 9. Loosely installing table lock lever.
To install the table, do these steps:
1.
Thread the table lock handle 3 turns into
the table support bracket.
the table support bracket.
2.
Insert the lock shoe into the pocket locat-
ed inside the hole of the table support
bracket. See
ed inside the hole of the table support
bracket. See
Figure 9.
3.
Slide the table support bracket onto the
column until the table support bracket is
near the bottom of the column.
column until the table support bracket is
near the bottom of the column.
4.
Tighten the table lock handle to lock the
table in position.
table in position.
When installed correctly, the table should
lock in position with firm lever torque.
lock in position with firm lever torque.
-10-
Table
ASSEMBLY