GE DBLR333 Benutzerhandbuch

12

• Make sure the dryer plug is pushed completely into 

the outlet.

• Check the house fuse/circuit breaker box and replace

fuse or reset breaker. NOTE: Most electric dryers use 
2 fuses/breakers.

• Check the house fuse/circuit breaker box and replace

both fuses or reset both breakers. Your dryer may tumble

if only one fuse is blown or one breaker tripped.

• Make sure gas shutoff at dryer and main shutoff are 

fully open.

• Move dryer to an even floor space, or adjust leveling legs

as necessary until even.

• Follow directions on fabric softener package.

• Use your dryer to dry only clean items. Dirty items can 

stain clean items and the dryer.

• Sometimes stains which cannot be seen when the 

clothes are wet appear after drying. Use proper washing
procedures before drying.

• Clean lint screen before each load.

• Sort lint producers (like chenille) from lint collectors 

(like corduroy).

• See suggestions in this section under STATIC.

• Separate large loads into smaller ones.

• Empty all pockets before laundering clothes.

• Try a fabric softener.

• Bounce

®

Fabric Conditioner Dryer Sheets have been 

approved for use in all GE Dryers when used in 
accordance with the manufacturer’s instructions.

• Try a fabric softener.

• Adjust setting to LESS DRY or DAMP DRY.

• Try a fabric softener.

• Automatic drying times will vary according to the type 

of heat used (electric, natural or LP gas), size of load, 
types of fabrics, wetness of clothes and condition of 
exhaust ducts.