Grizzly H8203 Benutzerhandbuch
H8203 Professional Drill Sharpening Machine
-11-
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Setup Safety
SECTION 3: SETUP
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover the machine is damaged, please imme-
diately call Customer Service at (570) 546-9663
for advice.
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover the machine is damaged, please imme-
diately call Customer Service at (570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
tion of your shipment, inventory the contents.
Unpacking
Inventory
The following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.
nents shipped with your machine. Lay the compo-
nents out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Box 1: (Figure 6)
Qty
A. Collets .......................................................11
— 2.0-3.0mm (
1
⁄
8
") Collet ........................... 1
— 3.1-4.0mm (
5
⁄
32
") Collet .......................... 1
— 4.1-5mm (
3
⁄
16
") Collet ............................. 1
— 5.1-6mm (
1
⁄
4
") Collet ............................... 1
— 6.1-7mm (
9
⁄
32
") Collet .............................. 1
— 7.1-8mm (
5
⁄
16
") Collet .............................. 1
— 8.1-9mm (
3
⁄
8
") Collet .............................. 1
— 9.1-10mm (
25
⁄
64
") Collet ........................... 1
— 10.1-11mm (
7
⁄
16
") Collet ........................... 1
— 11.1-12mm (
15
⁄
32
") Collet ......................... 1
— 12.1-13mm (
1
⁄
2
") Collet ........................... 1
B. Collet Holder ............................................... 1
C. Hex Wrench 4mm ....................................... 1
D. Lock Ring ................................................... 1
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Figure 6. H8203 inventory.
A
B
C
D