Grizzly G3358 Betriebsanweisung
-28-
g3358 Milling/drilling Machine
section 6: maintenance
always disconnect power
to the machine before
performing maintenance.
failure to do this may
result in serious person-
al injury.
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
follow this maintenance schedule and refer to any
specific instructions given in this section.
daily check:
•
•
loose mounting bolts.
•
damaged cutting tools.
•
Worn or damaged wires.
•
Any other unsafe condition.
•
Clean/Vacuum chip buildup from machine.
•
V-belt tension, damage, or wear.
•
lubrication (
page 28)
schedule
Metal chips left on the machine that have been
soaked with water-based coolant will invite oxida-
tion and a gummy residue build-up around the
moving parts. use a brush and shop vacuum to
remove chips and debris from the working sur-
faces of the mill. never blow off the mill with com-
pressed air, as this will force metal chips deep into
the mechanisms and may cause injury to yourself
or bystanders.
soaked with water-based coolant will invite oxida-
tion and a gummy residue build-up around the
moving parts. use a brush and shop vacuum to
remove chips and debris from the working sur-
faces of the mill. never blow off the mill with com-
pressed air, as this will force metal chips deep into
the mechanisms and may cause injury to yourself
or bystanders.
remove any rust build-up from unpainted cast
iron surfaces of your mill and treat with a non-
staining lubricant after cleaning.
iron surfaces of your mill and treat with a non-
staining lubricant after cleaning.
Keep unpainted cast iron surfaces rust-free with
regular applications of products like g96
regular applications of products like g96
®
gun
treatment, slipit
®
, or Boeshield
®
t-9 (see the
grizzly catalog or website).
cleaning and
protecting