Xantrex Technology 400 PLUS Benutzerhandbuch

23

Follow these steps to connect the XPower 175 Plus or XPower 

400 Plus inverter:
1. Place the inverter on a flat surface like the floor of your 

vehicle.

2. Make sure the On/Off switch on the front panel is off.
3. The XPower 175 Plus has a power cord with lighter plug 

hard-wired into it, so you do not need to complete this step.

If you have a XPower 400 Plus, take the power cord 
equipped with the lighter plug (

) and place the ring 

terminals over the two cabling terminals on the back of the 
inverter. (The cabling terminals are shown in 

.))

Make sure you connect red to red and black to black, 

and make sure you screw the nuts on tightly.