Grizzly G4008 Benutzerhandbuch
-10-
G4008/G4009 Drill Press
Figure 8.
Figure 6.
Figure 9.
1.
Place the crank handle onto the raise/lower
shaft and tighten down.
shaft and tighten down.
Figure 6.
5.
Thread the column lock handle into the col-
umn bracket. Leave the lock handle loose for
now.
umn bracket. Leave the lock handle loose for
now.
Figure 9.
Working Table
Figure 7.
2.
Insert the M16-2.0 x 40 cap screw through the
hole located on the bottom/rear of the table
bracket.
hole located on the bottom/rear of the table
bracket.
3.
Thread the cap screw into the column bracket
and tighten down.
and tighten down.
Figure 7.
4.
Place the table into the hole in the table brack-
et and secure with the table lock handle.
et and secure with the table lock handle.
Figure 8.