Ridgid R7110 Benutzerhandbuch

14

Look for these accessories at The Home Depot:
 

High Speed Bits (For wood or metal) .................................................................................................1/2 in. (13 mm) Max.

 

Masonry Bits ......................................................................................................................................1/2 in. (13 mm)  Max.

 

Wood Boring Bits .........................................................................................................................1-1/4 in. (31.8 mm) Max.

 

Hole Saws ...................................................................................................................................2-1/2 in. (63.5 mm)  Max.

 

Drill Stand

 

Doweling Jig

Current attachments and accessories available for use with this tool are listed above. Do not use any attachments 
or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not 
recommended can result in serious personal injury.

The chuck may become loose on the spindle and develop a 
wobble when using the drill. Periodically check chuck screw 
for tightness. A loose screw may cause the chuck jaws to 
bind and prevent them from closing. To tighten:


  Unplug the drill.



  Open the chuck jaws.



  Insert a hex key into the chuck and tighten chuck jaws 

securely.  Tap  the  hex  key  sharply  with  a  mallet  in  a 
clockwise  direction.  This  will  tighten  the  chuck  on  the 
spindle.



  Open the chuck jaws and remove the hex key wrench.



  Tighten the chuck screw.

 

NOTE: The chuck screw has left-hand threads.