Black & Decker BDCDMT120IA Benutzerhandbuch

• keep your hair, clothing, and gloves away from air vents. Air vents often cover moving

parts in which these items can be caught.

• hold tool firmly with two hands, one hand on the handle, and the other gripping the bottom

around the battery area. Use auxiliary handle if provided. Loss of control can cause personal injury.

wARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to the State of California to cause

cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well ventilated area, and work with approved safety

equipment, such as those dust masks that are specially designed to filter out microscopic particles.

• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and

other construction activities. wear protective clothing and wash exposed areas with

soap and water.

Allowing dust to get into your mouth, eyes, or lay on the skin may promote

absorption of harmful chemicals.

wARNING:

Use of this tool can generate and/or disperse dust, which may cause serious

and permanent respiratory or other injury

. Always use NIOSH/OSHA approved respiratory

protection appropriate for the dust exposure. Direct particles away from face and body.

• Wear appropriate hearing protection during use. Under some conditions and duration of use,

noise from this product may contribute to hearing loss.

wARNING:

ALwAyS use safety glasses. Everyday eye glasses are NOT safety

glasses. Also use face or dust mask if cutting operation is dusty.

ALwAyS wEAR CERTIfIED SAfETy EQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CPA Z94.3),

• ANSI S12.6 (S3.19) hearing protection,

• NOSH/OSHA respiratory protection.

SyMBOLS
The label on your tool may include the following symbols. The symbols and their definitions are as follows:

V ..................volts A ...................amperes
Hz ................hertz W ..................watts
min ..............minutes

................alternating current

.............direct current

no .................no load speed

................Class I Construction

..................earthing terminal

(grounded)

................safety alert symbol

................Class II Construction

.../min or rpm...revolutions or

(double insulated)

reciprocation per minute

............Read instruction manual before use

..................Use proper respiratory protection

................Use proper eye protection

..................Use proper hearing protection

Description

Catalog #

These products use the batteries and chargers listed in the chart below.

12v

Max*

Battery:

LB12

LBX12

12v

Max*

Battery

Charger:

LCS12

20v Max** Lithium-Ion Battery:

LBXR20

20v Max** Lithium-Ion Battery:

LB20 / LBX20

20v Max** Lithium-Ion Battery Charger:

LCS20

2 Amp Fast Charger:

L2AFC

2 Amp Fast Charger:

L2AFCBST