Sears 172.104 Benutzerhandbuch

Seite von 17
24
MAINTENANCE
TO RETIGHTEN A LOOSE CHUCK 
(Figs. 18 and 18a)
The chuck may become loose on the spindle 
and develop a wobble. Also, the chuck 
screw may become loose, causing the chuck 
jaws to bind and prevent them from closing. 
To tighten:
 1.  Lock the trigger switch by placing the 
      Forward / Reverse Selector Switch with Power 
      Lock-Off in the center, or OFF position.
 2.  Open the chuck jaws.
 3.  Insert the hex key into the chuck and tighten 
      the chuck jaws securely. Tap the hex key 
      sharply with a mallet in a clockwise direction. 
      This will tighten the chuck on the spindle. 
 4.  Open the chuck jaws, and remove the hex key.
 5.  Tighten the chuck screw in a counter-
      clockwise direction.
Sears and other Craftsman
®
 outlets offer a large selection of Craftsman and Companion 
drill/driver accessories designed for all your drill/driving applications.
Kits and sets specifically designed for drilling and driving. Twist drill bit sets, variety insert 
(screwdriver) bit sets, spade bit sets, carbide-tipped masonry drill bit sets, extra long bits, 
magnetic bit holders and more.
Visit your local Sears store or other Craftsman outlets or shop sears.com/craftsman for 
all of the accessories for your drill/driver.
ACCESSORIES
!
                              The use of attachments or accessories that are not 
recommended for this tool might be dangerous and could result in serious 
injury.
WARNING:
10-4-07  Drill
10300-10400
5
7
3
1
9
Companion
Fig. 18a
Fig. 18
5
7
3
1
9
Companion
25
BATTERIES
The battery pack for this tool is equipped with nickel-cadmium rechargeable batteries. 
Length of service from each charging will depend on the type of work you are doing.  
The batteries in this tool have been designed to provide maximum trouble-free life. 
However, like all batteries, they will eventually wear out. 
DO NOT disassemble battery 
pack and attempt to replace the batteries. Handling of these batteries, especially when 
wearing rings and jewelry, could result in a serious burn.
!
                              Upon removal, cover the battery pack’s terminals with 
heavy-duty adhesive tape. Do not attempt to destroy or disassemble battery 
pack or remove any of its components. Nickel-cadmium batteries must be 
recycled or disposed of properly. Also, never touch both terminals with metal 
objects and / or body parts as short circuit may result. Keep away from children. 
Failure to comply with these warnings could result in fire and / or serious injury.
WARNING:
ACCESSORIES cont.
To obtain the longest possible battery life, we suggest the following:
  
1.   Remove the battery pack from the charger once it is fully 
         
      charged and ready for use.
For battery storage longer than 30 days:
 
•  Store the battery pack where the temperature is below 80°F
 
•  Store battery packs in a “discharged” condition
BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING
To preserve natural resources, please recycle or dispose of batteries properly. 
This product contains nickel-cadmium batteries. Local, state or federal laws may prohibit 
disposal of nickel-cadmium batteries in ordinary trash. 
Consult your local waste authority for information regarding available recycling and / or 
disposal options.
N i - C d