Sears 315.11485 Benutzerhandbuch

13

WARNING: 

Battery tools are always in operating 

condition. Therefore, switch should always be locked 
when not in use or carrying at your side.

See Figure 5.
This tool has the feature of being reversible. The direction 
of rotation is controlled by a selector located above the 
switch trigger. With the drill held in normal operating 
position, the direction of rotation selector should be 
positioned to the left of the switch for drilling. The drilling 
direction is reversed when the selector is to the right of 
the switch. When the selector is in center position, the 
switch trigger is locked.

To prevent gear damage, always allow 

chuck to come to a complete stop before changing 
the direction of rotation.

To stop, release switch trigger and allow the chuck to come 
to a complete stop.

See Figure 6.
Your drill has a keyless chuck. As the name implies, you 
can hand tighten or release drill bits in the chuck jaws. 
Grasp and hold the collar of the chuck with one hand. 
Rotate the chuck body with your other hand. The  arrows 
on the chuck indicate which direction to rotate the chuck 
body in order to 

LOCK (tighten) or UNLOCK (release) the 

drill bit.

See Figure 5.
The switch trigger can be locked in the 

OFF position. This 

feature can be used to prevent the possibility of accidental 
starting when not in use. To lock switch trigger, place the 
direction of rotation selector (Forward/Reverse Selector) in 
center position.
 

Note: When selector is in center position, switch trigger 

is locked.

WARNING: 

Do not hold chuck body with one hand 

and use power of the drill to tighten chuck jaws on 
drill bit. Chuck body could slip in your hand or your 
hand could slip and come in contact with rotating 
drill bit. This could cause an accident resulting in 
serious personal injury.

Fig. 5

Fig. 6