Lincoln Electric SVM186-A Benutzerhandbuch
OUTPUT PROBLEMS
Observe Safety Guidelines detailed in the beginning of this manual.
PROBLEMS
(SYMPTOMS)
POSSIBLE AREAS OF
MISADJUSTMENT(S)
RECOMMENDED
COURSE OF ACTION
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely,
contact the Lincoln Electric Service Department for technical troubleshooting assistance before you proceed.
Call 1-888-935-3877.
contact the Lincoln Electric Service Department for technical troubleshooting assistance before you proceed.
Call 1-888-935-3877.
CAUTION
When AC TIG welding, the arc is
erratic and there is a loss of
"cleaning" of the work piece.
erratic and there is a loss of
"cleaning" of the work piece.
1. The tungsten electrode may be
too small for the process. Use
a larger diameter tungsten or a
pure tungsten.
a larger diameter tungsten or a
pure tungsten.
2. If a helium blend is used as a
shielding gas, then reduce the
percentage of helium.
percentage of helium.
1. Check components R3 and C4
in the high voltage transformer
primary circuit.
primary circuit.
2. Perform the SCR Bridge Test.
The end of the tungsten electrode
melts away.
melts away.
1. The welding current is too high
1. This may be a welding proce-
dure problem.
Contact The Lincoln Electric
Service Department 1-888-935-
3877.
Service Department 1-888-935-
3877.
TROUBLESHOOTING AND REPAIR
F-13
F-13
PRECISION TIG® 225