Sterling 882.01749.00 Benutzerhandbuch

Seite von 93
882.01749.00 
 
8 of 93 
 
1-4  Warnings and Precautions 
 
Our equipment is designed to provide safe and reliable operation when installed and operated within 
design specifications, following national and local safety codes. This may include, but is not limited to 
OSHA, NEC, CSA, SPI, NEPA or CE and any other local, national and international regulations. To 
avoid possible personal injury or equipment damage when installing, operating, or maintaining this 
equipment, use good judgment and follow these safe practices:  
 
;  Read and follow these operation and installation instructions when installing, 
operating, and maintaining this equipment. If these instructions become damaged or 
unreadable, additional copies are available from the manufacturer.  
;  Follow all SAFETY CODES
;  Keep fingers away from rotating discs, slide gates, augers, clean-outs, and calibration 
hatches. Automatic operation may start unexpectedly, A PINCH HAZARD 
CAPABLE OF CAUSING BODILY INJURY EXISTS ANY TIME THE 
POWER IS ON. 
 
;  Wear SAFETY GLASSES and WORK GLOVES.  
;  Work only with approved tools and devices.  
;  Disconnect and/or lock out power and compressed air before servicing or maintaining 
the equipment.  
;  Use care when LOADINGUNLOADINGRIGGING, or MOVING this 
equipment.  
;  Operate this equipment within design specifications.  
;  OPENTAG, and LOCK ALL DISCONNECTS before working on equipment. 
You should remove the fuses and carry them with you.  
;  NEVER PUT FINGERS OR TOOLS IN HOPPER, AUGER OR SLIDE GATE 
AREA.  
;  Make sure the equipment and components are properly GROUNDED before you 
switch on power.  
;  Do not restore power until you remove all tools, test equipment, etc., and the 
equipment and related components are fully reassembled.  
;  Only PROPERLY TRAINED personnel familiar with the information in this 
manual should work on this equipment.  
 
We have long recognized the importance of safety and have designed and manufactured our 
equipment with operator safety as a prime consideration. We expect you, as a user, to abide 
by the foregoing recommendations in order to make operator safety a reality.