Symbol Technologies MC9000-G Benutzerhandbuch
Communications
4-9
The first ActiveSync operation must be performed with a local, direct
connection.
To retain partnerships after a cold boot, capture partnership registry
information in a .reg file and save it in the Flash File System. See the
Windows CE Help File for Symbol Terminals for details.
connection.
To retain partnerships after a cold boot, capture partnership registry
information in a .reg file and save it in the Flash File System. See the
Windows CE Help File for Symbol Terminals for details.
For more information about using ActiveSync, start ActiveSync on the host computer and see
ActiveSync Help.
ActiveSync Help.
Serial Communication Setup
For serial communication using accessories that can communicate with
either a serial or USB connection, connect only the serial cable. Do not
connect both the serial and USB cables. If both serial and USB
communication cables are required, the host computer’s USB port must be
disabled in ActiveSync before serial communication can be enabled.
either a serial or USB connection, connect only the serial cable. Do not
connect both the serial and USB cables. If both serial and USB
communication cables are required, the host computer’s USB port must be
disabled in ActiveSync before serial communication can be enabled.
Setting Up a Connection on the Mobile Computer
1.
On the mobile computer tap Start - ActiveSync to display the ActiveSync window.
Figure 4-8. ActiveSync Window
Note
Note