Symbol Technologies MC9000-G Benutzerhandbuch
Communications
4-13
7.
Connect the mobile computer to the accessory being used for communication.
8.
Power on the mobile computer.
9.
If a partnership was already created between the host computer and mobile computer,
synchronization occurs automatically upon connection.
synchronization occurs automatically upon connection.
Ethernet Communication Setup
To establish a connection between the mobile computer and the host computer to communicate over
an Ethernet network, perform the following:
an Ethernet network, perform the following:
•
Install MobileDox Cradle Manager
•
Install eConnect
•
Mobile computer configuration
•
Host computer configuration
•
DHCP server configuration
•
Cradle configuration.
Installing MobileDox Cradle Manager
MobileDox Cradle Manager is used only when establishing a connection
using the Four Slot Ethernet cradle.
using the Four Slot Ethernet cradle.
The Cradle Management software features:
•
View cradles that are attached to the network via MobileDox Net
•
View cradle status
•
Modify cradle settings including:
• IP address settings
• DNS and WINS settings
• Identification settings
• USB port specific settings
•
Restart cradles connected to the network via MobileDox Net
•
Update the firmware of MobileDox Net.
Note