Symbol Technologies MC9000-G Benutzerhandbuch

4-16

3.

Click OK.

Before communicating through an Ethernet connection, create a partnership 
between the mobile computer and the host computer via a USB connection. 
See Setting up a Partnership on page 4-4 for detailed instructions.

If you use a DHCP server to distribute IP addresses and other network parameters, the server setup 
should include the following:

•

IP address pool (1 or 5 IP address per cradle)

•

Router/gateway address

•

One or more DNS server addresses

•

One or more WINS server addresses

•

Subnet mask.

To assign the initial cradle IP address, you can either use a DHCP server, as 
shown above, or use the MobileDox Cradle Manager (see Installing 
MobileDox Cradle Manager on page 4-13). The DHCP server is the preferred 
method.

The MobileDox Cradle Manager allows you to setup the Device IP Address and modify cradle 
settings. See Installing MobileDox Cradle Manager on page 4-13 for instructions to download and 
install the software.

See 

 for instructions on Four Slot Ethernet cradle connections.

By default, the cradle uses DHCP to obtain its IP address. However, if DHCP fails, the Cradle Manager 
can assign an IP address. 

This is used if the cradle is connected to the network, but fails to appear in 
MobileDox. Enter the hardware device (MAC) address to locate the cradle 
and assign it a new IP address.

Note

Note

Note