Mitsubishi Electronics 60/60S Benutzerhandbuch
8. High-speed Program Server
8.2 Host (Compatible with M60 Series)
I-324
8.2.2 Downloading (IC to host)
No. < NAME > < BYTE > < DATE > <TIME>
1 12345678.PRG
1 12345678.PRG
12345678 1999 /04/29
2 1000.prg
123
/05/03 09:32
3 Test.prg
123
/05/04 09:32
An example of registering the machining program
file "Test.prg (file No. 3)" saved in the host
computer as "2000.prg" in the IC card is
explained in this section.
file "Test.prg (file No. 3)" saved in the host
computer as "2000.prg" in the IC card is
explained in this section.
COPY HOSTSET
HOST
#(2) (
)
→
( )
(1) Input "2" in the setting area # ( ), and press
the cursor key
.
COPY HOSTSET
HOST
#(2) (
)
→
( )
(2) Input the file No. of file name to be uploaded
from the file list in the setting area ( ), and
press the cursor key
press the cursor key
.
* Up to 12 uppercase alphabetic characters
can be designated as the file name.
* The values 1 to 10 are used only to
designate the "file No.".
COPY HOSTSET
HOST
#(2) (
)
→
( )
(3) Input the program No. to enter into the IC as
a number in the following setting area. Up to
eight digits can be designated for the
program No.
eight digits can be designated for the
program No.
(4) Press the
INPUT
key.
The message "
DATA IN EXECUTION
" will
appear. When the transmission is completed,
the message "
the message "
DATA IN COMPLETE
" will
appear, and the setting area will be cleared.
HOST
IC CARD
MENU
DIR. (
)
DATA IN EXECUTION
(Note 1) The machining program being input from the host computer cannot be automatically run. (The
host computer machining program cannot be searched.)
(Note 2) The input cannot be canceled.
(Note 3) Operations on the screen cannot be carried out during the input.
(Note 3) Operations on the screen cannot be carried out during the input.